I-view DM-650-F36 Vandal Proof Dome UTP Camera Bedienungsanleitung PDF herunterladen

 DM-650-F36 Dome Camera Function Description:

1.) Lens: 3.6 mm board Lens. Provide 6mm/8mm/12mm as alternative choices.

2.) Screw: To fix the housing body and cover.

3.) Mounting Hole: There are 3 holes to fix the camera housing on the ceiling.

4.) Gutter: To fix the wire cable of camera.

5.) LED: Power indicator, Green LED On: Power on. Green LED Off: No Power. Yellow LED:

Reserve

6.) RJ-45 connector: To transmit Power and Video signals via UTP cable. Please refer to the RJ45 pin

assignment.

7.) Socket cable: To Connect OSD control cable (Optional) for camera parameters setup.

 PTT-140VPM Function Description: (On DVR site)

1.) Power Plug: Connect DC 12V-18V power source input and provide power output for camera.

2.) BNC Cable: For video output to DVR.

3.) RJ-45 connectors: To transmit Power and Video signals via UTP cable.

Please refer to the pin assignment.

4.) LED: Power indicator, LED On: Power on. LED Off: Not enough power or No Power.

5.) RJ-45 pin Assignment: Connect the 4-pair UTP cable between DVR site and camera end for video/power

transmission.

WARNING: This camera MUST use DC 12V-18V power adapter for power transmission.

V1.0

Male BNC

RJ45 Connector

Power Indicator

Power Plug

PTT-140VPM RJ45 Pin Assignment

1 2 3 4

1  DM-650-F36 Dome Camera Function Description: 1.) L

2  Installation Warning: 1. Please DO NOT USE SHIELD TWISTED PAIR WIRE. This will cause severe degradation on distance performance and reduce the

Seite 3

3  Standard Accessories ¾ PTT-140VP Video/Power Balun for DVR site x 1 pc. ¾ Screws to fix camera housing x 3 pcs; ¾ L-Wrench screwdriver x 1 p

4 B / W↲ BURST ON/OFF IR OPTIMIZER ON/OFF MODE AUTO/CENTER LEVEL 0~31 EXT1 & EXT2 for external trigger signal. PRIVACY OFF ON AREA SEL 1/4、2/4

Keine Kommentare

I-view DM-650-F36 Vandal Proof Dome UTP Camera Bedienungsanleitung